Skip to main content
+39 0172 495790  ·  info@gazzeraitaly.com
☰
Request a quote

Hydraulic power packs for dump trailers, liftgates & snow plows

Dump trailers, liftgates, snow plows and dock levelers: compact, dependable 12/24V DC hydraulic power packs.

Page maintained by the Gazzera Srl engineering team, updated .

Gazzera manufactures 12V and 24V DC hydraulic power packs for vehicle equipment: dump trailers, liftgates, snow plows and dock levelers. Compact single- or double-acting units engineered around the vehicle’s space and current limits.

Industry needs and our answers

Single or double acting

A dump body lowers by gravity (single acting); liftgates and plows are powered in both directions (double acting): the right circuit comes from the function, not from a catalogue page.

On-board space and weight

Space between chassis and body is tight: horizontal and vertical layouts, made-to-measure reservoirs and compact manifolds to fit where needed.

Currents and wiring

At 12V currents run high: properly sized contactors, pendant or radio controls and clear wiring guidance cut failures and service calls.

Cold and weather

Plows and liftgates work in winter: low-viscosity oils, motors with adequate starting torque and protection against water and salt.

A real case: Power pack for a vehicle-mounted scissor lift

Technical data of the unit built by Gazzera
Machinescissor lift installed on a vehicle
Motor0.55 kW, 2-pole, three-phase 230/400 V 50 Hz, S3 20% duty, B14 flange
Pump0.75 cm³/rev, on a group 0.5 manifold (special custom unit)
Pressurerelief valve set at 190 bar
Reservoir1.5 l plastic
Special featurestraceability label on every unit; for battery vehicles the same platform exists at 24 V DC, with compensated lowering, an oversized reservoir and a dedicated contactor

Request a quote

Illustration of hydraulic power packs for vehicle equipment (generated image)
FAQ

Frequently asked questions

What hydraulic pump does a dump trailer need?

A standard dump trailer takes a 12V single-acting unit: pump flow is chosen from the desired lift time, and the lowering valve controls the gravity return. We supply the complete unit with reservoir, ready to wire.

Do you supply complete kits for body builders?

Yes: unit, controls and connection parts in a single supply, with a stable BOM for series production and support direct from the manufacturer.

Have an application in mind?

Send us your diagram or specs: we reply with a technical proposal sized for your application.

Request a quote
Download the catalogue
Online