To complete the range of components and therefore, implement the possible functional requirements, has been provided a series of mechanical and hydraulic accessories. The range is constantly developing, as it reflects the current needs of the individual customer, but also the possibility of new applications as well. Our technical department works to have a continuous updating of this section of components.
This galvanized steel bracket, or on demand “painted”, gives the possibility of fastening the mini power pack to the support the customer’s machine. The F01 is fixed to the central manifold of the mini power pack by two M10 screws. The bracket is provided with n° 4 free holes diameter 9mm, for fixing it to the customer’s equipment.
The pressure gauge isolator valve presents a plastic handwheel, for the opening or closure of the vein of the fluid which reaches the pressure gauge. The importance of this component consist to preserve the reading instrument by the pressure, by sudden spikes or heavy pulsations of the oil. Is possible mount it on the BL010 manifold at the coupling 1/8 “gas or on the BL004-1 manifold at the coupling side 1/4” gas. The double positioning possibility of the pressure gauge isolator allows to choose the best location both as regards the overall dimensions, and for the convenience of reading of the gauge.
Working temperature: -20°C +100°C
Connections: G 1/4″
Max pressure: 400bar
Important instrument of pressure reading, in the range are provided gauges in four scales: 0-60; 0-100; 0-160; 0-250. Can be mounted either on the ES pressure gauge isolator that on the manifolds BL010 or BL004-1. In some specific cases, where required by the hydraulic circuit, the pressure gauge is connected through a capillary tube, to an outlet pressure switch. The latter can be positioned both on the BL010 manifold that the BL004-1 one.
Nominal diameter: 63mm
Protection class: 1,3
Protection degree: IP 65
0 – 60 bar
0 – 100 bar
0 – 160 bar
0 – 250 bar